Grundfos Unilift bilge pump
5/5
UNILIFT SUBMERSIBLE PUMPS FOR DRENCHING CLEAN AND DIRTY WATER
Submersible pump for clean or slightly dirty/contaminated water, suitable for draining swimming pools, rainwater, horticultural applications, effluent from showers and washing machines, etc.
• Pumps in the Unilift CC range can pump water from depths as low as 3 mm above ground level by removing the strainer. Pumps in the Unilift CC range feature a check valve at the outlet to prevent backflow from the pipework system. They feature an adapter that allows for suitable connections with 3/4”, 1” or 1 1/4” outlets. The strainer is made of stainless steel, whilst the main components of the pump (such as the jacket and housing) are made of moulded composite materials.
• The pumps in the Unilift KP range are single-stage, made of stainless steel, with a robust design and an upward-facing discharge port located at the top of the pump. The outer casing is manufactured as a single piece. Both the mains connection cable and the level switch cable are connected to a single vulcanised, watertight plug which is inserted into a socket located in the watertight stator housing. The motors (encapsulated, asynchronous and single-phase or three-phase) have a liquid-filled rotor chamber and water-lubricated bearings.
• Single-phase 230V with 10 m cable. Includes level switch.
• 1 1/4” discharge connection and 10 mm solids passage.
Submersible pump for clean or slightly dirty/contaminated water, suitable for draining swimming pools, rainwater, horticultural applications, effluent from showers and washing machines, etc.
• Pumps in the Unilift CC range can pump water from depths as low as 3 mm above ground level by removing the strainer. Pumps in the Unilift CC range feature a check valve at the outlet to prevent backflow from the pipework system. They feature an adapter that allows for suitable connections with 3/4”, 1” or 1 1/4” outlets. The strainer is made of stainless steel, whilst the main components of the pump (such as the jacket and housing) are made of moulded composite materials.
• The pumps in the Unilift KP range are single-stage, made of stainless steel, with a robust design and an upward-facing discharge port located at the top of the pump. The outer casing is manufactured as a single piece. Both the mains connection cable and the level switch cable are connected to a single vulcanised, watertight plug which is inserted into a socket located in the watertight stator housing. The motors (encapsulated, asynchronous and single-phase or three-phase) have a liquid-filled rotor chamber and water-lubricated bearings.
• Single-phase 230V with 10 m cable. Includes level switch.
• 1 1/4” discharge connection and 10 mm solids passage.
