PH Dinamik 1.5 l/h regulating pump

DINAMIK 1.5 l/h pH-regulating peristaltic pump | SEKO
Technical specifications:
Flow rate 1.5 l/h.
Maximum pressure 1.5 bar.
Santoprene tubing 6x10 mm (code 9900090057).
Power supply 100–240 V AC – 50/60 Hz.
Fuse 1 A.
Power consumption 3.5 W.
IP 65 protection.
Volume per revolution 2.5 ml.
CE certification.
Suction and discharge hose connection 4x6 mm.
ON / OFF / MOM (Priming) switch.
pH measurement range: 6…8 pH (sensitivity 0.1 pH).
4-digit 7-segment display.
BNC connector for connecting the pH sensor.
Transaxle Technology to extend motor life.
1-point pH calibration method (standard solution 7.00 pH/20°C).
Installation kit included:
Injection fitting with lip valve (code: 9900071016).
Ceramic suction filter (code: 9900106162).
Bracket, double-sided adhesive tape, plug and screw for mounting.
Roll of 4x6 mm PVC pipe (suction).
Roll of 4x6 mm PE pipe (discharge).
PSS3 ½" probe holder (code: 9900106670).
DN50- G1/2" flange (code: 0000120007).
pH 7.00 standard solution (code: 9900102002).
pH electrode 2–12 pH, 6 bar, 60°C. BNC, L=5 metres (code: 9900105101).