800 Series Amperometric Free Chlorine and pH Control Panel

Analyser Panel for measuring and controlling free chlorine concentration up to pH 8 and pH measurement | SEKO
Technical specifications:
Integrated mesh filter for water inlet.
Probe holder
with flow detector.
Automatic calibration of the amperometric probe.
Temperature compensation: 0 to 125 °C
Programmable setpoint and alarm.
VAC power supply.
RS485 serial ports with ModBus RTU communication protocol.
pH probe included.
General features:
Easy-to-use and intuitive
display.
Standard connections for 8x12mm tubing.
No solenoid valve required for calibration.
Free chlorine calibration in 10 seconds.
Air bleed valve at unit inlet.
Integrated 80-micron filter.
Proximity reed flow sensor, prevents overdosing when flow decreases. Integrated mounts for pH and ORP sensors.
Includes flow adjustment valve and sampling port.
New sensor positioning, with high operational precision, ensuring flow and pressure within the unit.
Maximum pressure: 6 bar.
Maximum temperature: 70°C.
Free chlorine measurement range: 0.00 to 5.00 ppm.
pH measurement range: 0.00 to 14.00.
Sample flow rate: 70–80 l/h.
pH electrode.
Electronic control:
Kontrol 800 is compact and easy to configure, featuring an alphanumeric display and an intuitive, multilingual menu (4 lines and 20 characters) that allows control of the following measurement ranges:
pH: 0.00 to 14.00 pH.
Redox (ORP): ± 1500 mV.
Free chlorine: 0.01 ppm to 200.00 ppm (with potentiostatic probe).
Temperature: 0.1 to 100.0 °C.