Komba DML dosing pump
5/5
USUALLY BOUGHT TOGETHER
CURRENT PRODUCT
Reference: 136115
Reference:24084
ARTICLES
1
TOTAL PRICE
215,00 €
CTE 5L/8B DML Digital Dosage Pump | SEKO
Technical specifications:
Flow rates: 3 to 5 l/h.
Maximum back pressure: up to 10 bar.
Power supply: 100–240 V AC – 50/60 Hz.
Stroke frequency: 0.31 to 0.52 strokes/minute.
Pump head: PVDF.
Diaphragm: PTFE.
External housing: Glass-fibre reinforced PP, IP65 protection rating.
Manual priming valve. External connectors for all signal inputs.
General characteristics:
Komba DML is a digital dosing pump with constant flow rate, manually adjustable via a keypad (frequency) mounted on the rear panel, and proportional flow rate based on an external digital input signal (water meter).
This pump can cover a wide range of applications, with a flow rate range of 3 to 5 l/h and a back pressure of 8 to 10 bar. The power supply is 100–240 Vac – 50/60 Hz, meaning the same pump can operate at different supply voltages.
The standard pump head is made of PVDF, ensuring high chemical compatibility with various liquids. Furthermore, the Komba DML is equipped with a manual priming pump for start-up. All Komba pumps use practical external connectors for signal input, so there is no need to open the pump to make connections.
The pump is supplied with a complete standard installation kit, which includes: a PVDF foot filter and injection valve, PVC suction and vent pipe, and a PVDF discharge pipe.
Technical specifications:
Flow rates: 3 to 5 l/h.
Maximum back pressure: up to 10 bar.
Power supply: 100–240 V AC – 50/60 Hz.
Stroke frequency: 0.31 to 0.52 strokes/minute.
Pump head: PVDF.
Diaphragm: PTFE.
External housing: Glass-fibre reinforced PP, IP65 protection rating.
Manual priming valve. External connectors for all signal inputs.
General characteristics:
Komba DML is a digital dosing pump with constant flow rate, manually adjustable via a keypad (frequency) mounted on the rear panel, and proportional flow rate based on an external digital input signal (water meter).
This pump can cover a wide range of applications, with a flow rate range of 3 to 5 l/h and a back pressure of 8 to 10 bar. The power supply is 100–240 Vac – 50/60 Hz, meaning the same pump can operate at different supply voltages.
The standard pump head is made of PVDF, ensuring high chemical compatibility with various liquids. Furthermore, the Komba DML is equipped with a manual priming pump for start-up. All Komba pumps use practical external connectors for signal input, so there is no need to open the pump to make connections.
The pump is supplied with a complete standard installation kit, which includes: a PVDF foot filter and injection valve, PVC suction and vent pipe, and a PVDF discharge pipe.
