Electromagnetic dosing pump with constant flow rate, adjustable via a potentiometer located on the front of the pump. Flow rate adjustable from 0 to 100%
Polypropylene head, PVDF heads, Teflon diaphragms and Pyrex balls. PVC fittings.
IP 65 protection. Voltage 230 V. 35 W.
Includes installation kit comprising suction filter, injection valve, PVC suction pipe and PE discharge pipe.
The steady green LED turns off with each stroke of the pump. Flashing green LED when the potentiometer is set to 0.
Level sensor input.
Steady red LED on, low level alarm
.
In the circuit’s electrical connections, there is a switch that regulates the pump’s dosing frequency.
With the potentiometer set to 100%, the frequency settings are: Full (switch in position C): The pump doses at a maximum frequency of 160 strokes per minute.
Partial (switch in position P): The pump doses at a maximum frequency of 32 strokes per minute.