Astralpool Acqua dosing pump Acqua dos dosing pump
5/5
The ACQUA DOS series of dosing pumps have been specifically developed to simplify their use and commissioning, and to meet the needs of the current market in terms of quality, product design and materials used. In addition, depending on the model, they have connectivity with the Fluidra Connect environment, which allows automation and remote management of the system.
Analogue dosing pump with constant flow rate, which can be adjusted manually by means of a power meter mounted on the front panel, and also has a minimum chemical level control input (not included).
The flow rate has two frequency ranges:
- 0 ÷ 20 maximum flow rate
- 0 ÷ 100 maximum flow rate
Analogue dosing pump with constant flow rate, which can be adjusted manually by means of a power meter mounted on the front panel, and also has a minimum chemical level control input (not included).
The flow rate has two frequency ranges:
- 0 ÷ 20 maximum flow rate
- 0 ÷ 100 maximum flow rate
The flow rate has two frequency ranges:
0÷20% of the maximum flow rate
0-100% of maximum flow rate
Flow rates: from 4 to 110 l/h (depending on the model).
Maximum back pressure: up to 16 bar
Power supply: 100÷240 Vac - 50/60 Hz
Displacement rate: from 160 to 300 strokes / minute (depending on the model).
Pump head in PVDF for high chemical compatibility.
Diaphragm: PTFE
Outer casing: glass fibre reinforced PP
Degree of protection: IP65
Manual priming valve for start-up.
Installation kit included:
PVDF foot filter.
PVDF injection valve.
PVC suction pipe (4 metres).
PE impulsion pipe (2 metres).
Wall fixing bracket.
