Astralpool Acqua dosing pump Acqua dos dosing pump
5/5
The ACQUA DOS series of dosing pumps have been specifically developed to simplify their use and commissioning, and to meet the needs of the current market in terms of quality, product design and materials used. In addition, depending on the model, they have connectivity with the Fluidra Connect environment, which allows automation and remote management of the system.
Analogue dosing pump with constant flow rate, which can be adjusted manually by means of a power meter mounted on the front panel, and also has a minimum chemical level control input (not included).
The flow rate has two frequency ranges:
- 0 ÷ 20 maximum flow rate
- 0 ÷ 100 maximum flow rate
Analogue dosing pump with constant flow rate, which can be adjusted manually by means of a power meter mounted on the front panel, and also has a minimum chemical level control input (not included).
The flow rate has two frequency ranges:
- 0 ÷ 20 maximum flow rate
- 0 ÷ 100 maximum flow rate
- Flow rate: From 0 to 110 l/h depending on the model.
- Maximum back pressure : up to 18 bar, depending on model.
- Power supply: 100÷240 Vac - 50/60 Hz
- Impulses: from 120 to 300 pulses/minute
- Head: PVDF
- Membrane: PTFE
- Housing: glass fibre reinforced PP
- Protection: IP65
- Manual priming valve.
With only 3 sizes, the pump can cover a wide range of performances, with a flow range from 0,4 to 110 l/h and a back pressure from 0,1 to 18 bar. The power supply is 100 ÷ 240 Vac - 50/60 Hz so the same pump can operate with different supply voltage, to suit any country.
The standard pump head is made of PVDF, so it has a high chemical compatibility with most of the chemicals to be dosed.
All series are equipped with a manual priming valve for start-up.
The pumps are supplied with a complete standard installation kit, including: PVDF-T foot filter and PVDF-T injection valve, PVC suction pipe, PE delivery pipe. A tank mounting foot and minimum chemical level control are available as accessories.