Replacement Cartridge Nanofiber AstralPool filter
4/5
- The manufacturer recommends changing the nanofibre cartridge approximately every 3 years.
- Original AstralPool spare part specifically for the NanoFiber filter model. Due to its design, it is not compatible with other filter cartridges.
- Available for models 150, 180 and 200.
- To replace the cartridge, proceed as follows:
- Carefully clean the inside, the cartridge and the seal seat of the lid assembly.
- Check that all the parts are in good condition, with no cracks or damage.
- Place the cartridge in its correct seat and press it down slightly.
- Place the cover gasket in its housing, previously removing any remaining dirt.
- Screw the cap assembly with the nut into its final position.
