Gre KTSPAE Spa Treatment Kit
5/5
Product features:
- Spa water treatment kit
- Suitable for inflatable or rigid spas
- Easy to use
- No dosing required
- Including: sanitiser 20 g x 4 pH plus 20g x 2 and pH minus 30g x 2
- Container contains 258 g
Instructions for use:
Slow chlorine tablets:
- Initial treatment: add 15 g of slow chlorine per m³ of water. After 2 hours, adjust the pH of the water to between 7.2 and 7.6 using pH minus or pH increaser.
- Maintenance treatment: with the pH of the water adjusted, place one slow chlorine compact per 25 m³ of water in the skimmer baskets every 7 days. In installations where dosing devices are used, fill them with slow chlorine tablets and circulate the water through them. It is essential that the entire volume of water in the pool is recirculated daily through the purification equipment. The free residual chlorine should always be between 0.5-2 mg/l. This check should be carried out at least twice a day.
pH minus tablets: Add the tablets to a dosing device or dissolve them in a glass. Add 1.5 kg of pH minus to reduce the pH of 100 m³ of water by 0.2 units, this dosage is for guidance only
pH plus tablets: Add the tablets to a dosing device or dissolve them in a beaker. Add 1.5 kg of booster to increase the pH of 100 m³ of water by 0.2 units, this dosage is for guidance only
